Florida Atlantic University S

Below I have 2 posts please provide a response for both. 150 words each with reference.

Part 1

Your response to your peers by extending, refuting/correcting, or adding additional nuance to their posts.

Steps In Performing Rectal Examination

Before performing the rectal examination, one should create a good rapport with the patient and ask for consent. Explain the procedure to the patient to know what to expect, including the discomfort associated with the procedure, and ensure a chaperone. Confirm the details of the client and the examination. Ensure there is privacy for confidentiality issues. Ensure all the required supplies for the procedure, such as a lubricating agent, hand gloves, and tissue paper, are available. To begin, wash hands and pat them dry with a clean cloth. Second, have the patient lie on his or her left side, buttocks at the edge of the examining table or bedside, with the right knee and hip slightly flexed (Patel et al.,2019). Begin by looking over the gluteal and anal areas with clean, gloved hands. Check for warts, discoloration of the skin, hemorrhoids, fissures, and skin tags (Seidel, H. M. 2017). Apply lubrication to the index finger of the right hand after the inspection. The patient should be notified when starting the procedure. The finger should be positioned in that it is anteriorly pointing and putting pressure on the anus’s midline. Continue pressing until the index finger enters the rectum, then measure the tone of the anal sphincter by having the patient press on your inspecting finger (College, R. 2018).

Assess all of the rectal walls systematically by rotating the right and left finger around the rectal canal. Examine the prostate gland, which should be palpable from the front. Assess for tenderness, nodularity, and consistency (College, R. 2018). Abnormalities such as tumor masses, hardened feces, or bleeding ulcers can be felt by doing so. Examine the size, regularity, and presence of a groove on the midline in men (Seidel, H. M. 2017). Remove the finger and examine it for feces, blood, and mucous stains. Remove the lubricant from around the anal canal and discard the used gloves in the trash. Allow the patient to dress and thank them before documenting the results of your assessment. Lastly, document the findings.

Rationale For Rectal Examination

The rectal examination helps identify several disease processes pertaining to the perineum, rectum, the seminal vesicles, the bladder, the prostate, and the anus, such as bleeding, incontinence, constipation, pain and prostate cancer in men.

Assessing Rectal Sphincter

Assessing the rectal sphincters evaluates the anal sphincter resting tone and squeeze pressure, representing internal and external sphincter function, respectively (Dawson, J. 2016). Proximal posterior palpation of the top of the anal sphincter complex during voluntary squeeze will assess puborectalis function (Seidel, H. M. 2017). In patients with diarrhea and stool incontinence, the tone of the rectal sphincter will be poor and will be unable to squeeze the examining finger. It is common in people with neurological deficits resulting from trauma.

Differences In Rectal Examination in Benign Prostatic Hypertrophy and Acute Prostatitis

During the rectal examination of acute prostatitis, a careful procedure is indicated. When examining, refrain from massaging the prostate because it is painful and can cause unbearable discomfort to the patient (Patel et al.,2019). A 3600 rectal sweep of the inside of the rectum can be performed in both then followed by careful prostatic palpation in benign prostatic hypertrophy (College, R. 2018). In a patient suspected of having acute bacterial prostatitis, palpation of the prostate will be painful and lead to the spread of bacteria to surrounding tissues. In benign prostatic hyperplasia, prostatic massage is indicated.

Physical Examination Findings in Acute Prostatitis and Benign Prostatic Hyperplasia.

The physical examination findings are somehow related to the two, but a difference can be noted. When assessing the gland, physical examination findings of benign prostatic hyperplasia may reveal unequal sized lobes, increased fibrous elements, firm to hard nodules, and stony hard feeling. Findings of acute prostatitis may reveal a boggy, nodular, tender, hot normal feeling prostate gland. Suprapubic tenderness might also be present. Urinary continence may result in an enlarged tender bladder.


College, R. (2018). Digital rectal examination: guidance for nurses working with children and young people. Royal College Of Nursing.

Dawson, J. (2016). The Rectal Examination. Res Medica, 6(3). https://doi.org/10.2218/resmedica.v6i3.854 (Links to an external site.)

Patel, M. I., Kakala, B., & Beattie, K. (2019). Teaching medical students digital rectal examination: a randomized study of simulated model vs rectal examination volunteers. BJU International. https://doi.org/10.1111/bju.14778

Seidel, H. M. (2017). Mosby’s guide to physical examination. Mosby/Elsevier.

Below I have 2 posts please provide a response for both. 150 words each with reference.

Part 2

Your response to your peers by extending, refuting/correcting, or adding additional nuance to their posts.

Rectal Examination

Procedure followed

Rectal examination is crucial in examining if there are any growths around the anal, rectum, and the reproductive areas. This examination is done by both inspection and palpation. The first step will involve inspecting the buttocks area to see if there are any fistulous tracts and traces of blood, hemorrhoids, and rectal prolapse. The second step will involve a rectal examination where both sides of the buttocks will be scratched with a gloved finger to elicit an anal reflex or a wink (Hillman et al., 2019). The final step will be another examination where the gloved finger will be inserted through the anal opening and the whole circumference inspected, first inspecting between 1 and 2cm deep and then inspecting up to 7 to 8cm.

Rationale for the procedure

The first inspection of just checking at the outer surfaces is meant to look for any signs of illnesses and infections that can be visibly identified. For instance, presence of blood may be an indication of a problem in the rectum which should be checked. The superficial rectal examination that goes up to 2cm is meant to help in identifying the presence of any inflammation and growth that may be an indicator of abnormal prostate. Lastly, doing a deeper examination is crucial in identifying any abnormalities in the rectum like growths that may be an indication of diseases like rectum or anal cancer.

Possible results from rectal examination

A rectal examination does not necessarily mean that one has complications, but it is an examination that can be done regularly to check on complications early enough. For the case of someone who does not have any complications, there will be fistulous tracts or blood on the anal surface. Equally, the prostate will not be more than 2.5cm in length, which is about half the size of the gloved finger. Equally, a normal person cannot have any kind of inflammation along the rectal wall. The rectal wall is expected to be smooth.

Acute Prostatitis and Benign Prostatic Hypertrophy

The main difference between acute prostatitis and benign prostatic hypertrophy is that the former is an inflammation that can begot someone at any time, while the latter is a growth in the prostate that mainly beget elderly people (Grewal et al., 2017). Whereas benign prostatic hypertrophy can mainly be diagnosed through a rectal examination, an acute prostatitis can be diagnosed through three methods namely blood test measuring PSA and urine analysis. A digital rectal examination can, however, be used to obtain more accurate results. The common symptom includes an acute pelvic pain and other urinary tract symptoms.

Rectal Examination in Acute Prostatitis and Benign Prostatic Hypertrophy

As stated before, benign prostatic hypertrophy mainly entails a growth while acute prostatitis entail inflammation. As such, if the patient has benign prostatic hypertrophy, then a growth will be felt when doing a rectal examination. If the patient has acute prostatitis, then an inflammation will be felt. Equally, a patient with acute prostatitis will have a prostate that is either enlarged, tender, boggy, or both. A digital rectal examination involving any of the two should be done gently because when done vigorously, bacteremia or sepsis can be induced. It is also crucial to note that the two conditions are not the same as cancer.


Grewal, N., Tuli, A., Sridhar, F. K., & Mammen, K. J. (2017). Xanthogranulomatous prostatitis with benign prostatic hyperplasia: A rare combination. CHRISMED Journal of Health and Research, 4(3), 214.

Hillman, R. J., Berry-Lawhorn, J. M., Ong, J. J., Cuming, T., Nathan, M., Goldstone, S., … & Jay, N. (2019). International Anal Neoplasia Society guidelines for the practice of digital anal rectal examination. Journal of lower genital tract disease, 23(2), 138-146.

Florida Atlantic University S

Below I have 2 posts please provide a response for both. 150 words each with reference.

Part 1

Your response to your peers by extending, refuting/correcting, or adding additional nuance to their posts.

Patient Interview

The primary method of gathering thorough patient information to offer successful patient-centered care is through a patient interview, and the pharmacist’s competence is in the medication’s history aspect (Hewitt, 2021). A methodical approach is generally utilized to gather information about the patient, starting with finding the client’s primary complaint, also referred to as the purpose for the medical consultation, and then progressing into an examination of the patient’s particular complaint and problem. A thorough patient interview entails inquiring about the person’s medical, medication, socioeconomic, personal, and family medical history, as well as reviewing systems and potentially doing a physical examination.

Goals of a Patient Interview

The patient attends the interview expecting relief mostly from the discomfort and ambiguities of sickness, while the clinician actively performs the interview to explain the patient’s issues and develop therapeutic and diagnostic strategies to assist the patient. All regular medical interviews aim to diagnose and establish a therapeutic connection between the patient and the practitioner (Hartley, 2020). Signs (objective, such as physical and mental state exams) and symptoms are used to make a diagnosis. Past psychiatric and medical histories, personal history (covering background, family life, psychosexual development, educational and professional experience, and personal relationships), and family history should be included in a comprehensive examination.

The patient’s confidence and faith in the physician are required for the establishment of a therapeutic relationship. A therapeutic connection is told to diagnose the patient by description. Furthermore, a reliable connection is required to get a comprehensive patient history, which is required for an efficient diagnosis and proper treatment strategy.

Components of Patient History

The patient’s history consists of four components: main complaint, history of present illness (HPI), review of systems (ROS), and previous, family, and social history (PFSH) (Marting, 2018). The primary complaint should be documented to describe the cause of the interaction. The HPI should include the issue’s location/site(s), quality, intensity, duration, timing, situation, modifying aspects, and related signs and symptoms. Constitution, eyes, nose, mouth, cardiovascular, lymphatic, respiratory, gastrointestinal, neurologic, genitourinary, integumentary, mental, endocrine, immunologic, and “all others negative” ROS are included. Documentation of previous medical records, family history, and social background is included in the prior health, familial, and social background. The number of entries recorded for each component calculates the quality of the history conducted.

An Incident Where I Had Used Improper Technique on Measuring Blood Pressure and the Lesson I Learnt

When I measured a patient’s blood pressure, I once used an improperly sized cuff. I utilized an incorrectly sized blood pressure cuff, which resulted in artificially low results. I subsequently discovered that the cuff was too big, so I phoned the patient, advised him of my error, and invited him to return to the clinic so that we could correctly test his blood pressure. I discovered that choosing a cuff that spans two-thirds of the space between your patient’s shoulder and elbow is the best practical method to quickly and accurately fit a BP cuff. Having at least three cuff sizes (large adult, average adult and pediatric) will accommodate most adults. If you often treat pediatric patients, you will need a variety of smaller sizes.

A Barrier When You Had Assess a Patient from a Different Culture

In the medical field, I come into contact with patients of all nationalities and ethnicities. The most crucial hurdle I encountered was one of language. During the interviews, cultural differences and linguistic difficulties significantly impede patient relationships. During a care interaction, doctors are expected to accomplish three main goals: create a favorable relationship with the patient, identify what could be troubling the patient, and select the appropriate therapy for that condition. However, cultural obstacles might obstruct those objectives.


A thorough patient interview is essential for providing excellent and precise patient care. Learning and applying communication skills and strategies will allow for respectful patient contact and the chance to learn about the patient’s concerns, making your assessment, strategy, and approach uniquely patient-centered. However, during the interviews, one may face difficulties such as cultural and linguistic problems, making it challenging to perform the interviews.


Hartley, S., Raphael, J., Lovell, K., & Berry, K. (2020). Effective nurse–patient relationships in mental health care: A systematic review of interventions to improve the therapeutic alliance. International Journal of Nursing Studies, 102, 103490.

Hewitt, P. L., Chen, C., Smith, M. M., Zhang, L., Habke, M., Flett, G. L., & Mikail, S. F. (2021). Patient perfectionism and clinician impression formation during an initial interview. Psychology and Psychotherapy: Theory, research and practice, 94(1), 45-62.

Marting, R. (2018). 99213 or 99214? Three tips for navigating the coding conundrum. Family practice management, 25(4), 5-10.

Part 2

Your response to your peers by extending, refuting/correcting, or adding additional nuance to their posts.

Patient Interview

The goal of a patient interview is to clarify the problems of the patient. Another purpose of patient interviews is to form a therapeutic relationship between a nurse and a patent. It is through the patient interview that physicians derive therapeutic and diagnostic plans for the benefit of the patient. Besides, the patient interview is conducted to collect patient information (Hewitt et al., 2021). All phases of the nursing process follow after patient information is gathered during the interview. From the interview, a nurse or physician can determine if drug therapy problems exist.

Components of patient history include chief complaint, history of present illness (HPI), review of systems (ROS), and past, family, and social history. In the chief complaint element, a nurse can document the reasons for the encounter such as problems, symptoms, condition, and diagnostic. During interviews for the history of present illness, a healthcare professional can indicate the location, severity, timing, duration, context, and other modifying factors associated with the symptoms and signs of the health condition.

Patient interviews involve asking questions that would help to review the body systems of the patient. In the ROS component, assessment of eyes, ears, throat, mouth, respiratory, cardiovascular, genitourinary, gastrointestinal, musculoskeletal, neurologic, endocrine, allergy, and psychiatric is done (Hewitt et al., 2021). The last element of the patient interview involves evaluation of past family, medical, and social history to know any injuries, treatments, illnesses, medical events, heredity, marital status, sexual history, and habits that may affect the health of the patient (Hewitt et al., 2021).

There is a time I used the wrong technique to measure the blood pressure of a patient. In the incident, I used my finger to feel the pulse which matches with the heartbeat. I placed my index and middle finger on the patient’s hand. I listened to the pulse against my finger and I counted the taps in 10 seconds. Then, I multiplied the number by 6 to know the heart rate for a minute. From the experience, I learned that the method I used was not accurate. Also, patients and healthcare providers should be warned against using fingers and other defective devices to measure blood pressure (Pandit et al., 2020). When one wants to be accurate in measuring blood pressure, one should, by all means, avoid finger and wrist monitors. It is recommended to use Omron platinum, Lazle JPD-HA101, or greater goods BP monitor. With the use of the devices, it is advisable to take the blood pressure from the left arm for right-handed people and use the right arm for the left-handed people.

While offering services to a patient of a different culture, I encountered personal barriers that include worry, anxiety, and lack of confidence and preparedness. There was also work dissatisfaction and overload that made it challenging to deliver the best care to the patients. I would have had high confidence and be fully prepared if I would have learned the beliefs and health practices of the patients’ culture. There was also a language barrier that inhibited effective therapeutic communication (Amoah et al., 2019). The healthcare organization employed a translator to make the communication and effective. Besides, the patient was in much pain and would not effectively respond to all questions asked during the patient interview.


Amoah, V. M. K., Anokye, R., Boakye, D. S., Acheampong, E., Budu-Ainooson, A., Okyere, E., … & Afriyie, J. O. (2019). A qualitative assessment of perceived barriers to effective therapeutic communication among nurses and patients. BMC nursing, 18(1), 1-8. https://doi.org/10.1186/s12912-019-0328-0 (Links to an external site.)

Hewitt, P. L., Chen, C., Smith, M. M., Zhang, L., Habke, M., Flett, G. L., & Mikail, S. F. (2021). Patient perfectionism and clinician impression formation during an initial interview. Psychology and Psychotherapy: Theory, research and practice, 94(1), 45-62. https://doi.org/10.1111/papt.12266 (Links to an external site.)

Pandit, J. A., Lores, E., & Batlle, D. (2020). Cuffless Blood Pressure Monitoring: Promises and Challenges. Clinical Journal of the American Society of Nephrology, 15(10), 1531-1538. https://doi.org/10.2215/CJN.03680320

Florida Atlantic University S

Respond with 150 words – Shilani (Labor)

Globalization is the process of action and consolidation between people, corporations, and governments worldwide. Globalization has grown because of advancements in business and communication technology. With increased international interactions comes the development of global business, ideas, and society. Globalization is mainly the economic process of action and integration that’s related woth social and cultural aspects. Nevertheless, conflicts and dialogue are also huge parts of the history of globalization. Without the right application the idea of globalization could not have become a reality. Today all initiatives have the possibility to get global through the use of the internet. If the business has a website, the marketing tool would allow the business to get customers across thousands of miles with just the click of a button. Technology has permitted jobs to develop and increase in ways never thouight possible. Technology has become very significant that it has become the large business itself from machine hardware manufacture, to software innovation and development, and robotics.

The General Agreement on Tariffs and Trade is an agreement that regulates international trade. Its purpose was to reduce tariffs and trade barriers on a reciprocal and mutually advantageous basis. There are multiple labor and trade agreement acts that are enforced to encourage safe trading. The North American Free Trade Agreement (NAFTA) was implemented in 1994 to encourage trade between the U.S., Mexico, and Canada. The North American Agreement on Labor Cooperation (NAALC),one of the two side agreements, commits the United States, Canada, and Mexico to improve working conditions and living standards as NAFTA continues to promoteincreased trade.

Respond with 150 words – Marketing

Morgan Social media and mobile marketing have both quickly become one of the best ways for marketers to engage with their customers. Entering into web 2.0 where there is a “surge in internet usage and digital technologies and devices have spawned a dazzling array of online social media and other digital communities” (Kotler & Armstrong, 2021), as well as the tremendous growth of online marketing. Social media is the “independent and commercial online social networks where people congregate to socialize and share messages, opinions, pictures, videos, and other content” (Kotler & Armstrong, 2021). Within engaging through social media marketers can either use an existing social media or set up their own and either can lead to an increase in customers and profits for a company. Social media is good in that they are targeted, personal, can reach customers that are located further, and bring awareness to the brand or product. Mobile marketing is a great way to reach consumers that are on the go through their mobile devices via text, email, or mobile apps by enriching the and ensuring a better customer relationship. The challenging thing that comes with creating social media and mobile marketing advertisements is to develop and create something that is going to make the customer come running.

Respond with 150 words – Marketing

Brandi Social media and mobile marketing have become big business over the last several years, with companies spending more money on these types of advertising than on television and print ad advertising. Marketers have several ways to increase the engagement of customers including: using attention grabbing taglines, including appealing visuals, focusing on social aspects, and responding in a timely manner to feedback and questions. When creating social or mobile media content, the marketer must choose taglines and photos that will draw the customer’s attention. Many customers are quick to dismiss advertising, and marketers need to create content that will gain their attention causing them to view the advertisement. Marketers too must look to the social aspects of both the product and the company. By displaying how the company works to better the environment or how it has partnered with a worthy cause, marketers can show that a company is about more than just profit. Lastly, marketers look at the response time to customer complaints, questions, and feedback. A social or mobile media post should have active participants to respond inquiries and take feedbacks seriously. Challenges that marketers can face when trying to engage customers can include: trust issues, building brand loyalty, measuring how effective advertisements are, and gaining the right audience. Marketers must understand that customers do not trust everything that they see and hear and have concerns regarding the information that social and digital media obtains. Marketers must protect that information and be sure that it is used properly and that advertisements are guided towards the right audience. In this type of marketing, it can be difficult to target the right audience. Marketers must constantly monitor social and digital responses and work to redirect advertisements that may have been mistargeted. By following hashtags and social buzz, marketers can not only target the correct audience but also monitor the brand loyalty that is built and change as needed to grow that loyalty and audience. Monitoring social media buzz and feedback can help marketers to better understand the effects of advertising and to help with future marketing.

Respond with 150 words – Operation

Alyssa Aggregate planning is concerned with the quantity and timing or production for the intermediate future. Aggregate means combining the appropriate products and resources into general, or overall, terms. the four things needed for aggregate planning are: 1. A logical unit for measuring sales and output, 2. A forecast of demand for a reasonable intermediate planning period in these aggregate terms, 3. A method for determining the relevant costs, and 4. A model that combines forecasts and costs so that scheduling decisions can be made for the planning period. Aggregate planning in services differs from aggregate planning in manufacturing in the following ways: 1. Most services are perishable and cannot be inventoried. It is virtually impossible to produce the service early in anticipation of higher demand at a later time, 2. Demand for services is often difficult to predict. Demand variations may be more severe and more frequent, 3. Services are more customized than manufactured goods and can be offered in many different forms. This variability makes it difficult to allocate capacity. Units of capacity may also be hard to define, 4. Because most services cannot be transported, service capacity must be available at the appropriate place as well as the appropriate time, and 5. Service capacity is generally altered by changes in labor, rather than by equipment or space, and labor is highly flexible resource (Heizer, Munson, & Render, 2017). Generally, all aspects of business must be planned out in advance. There are two main strategies for aggregate planning. The first involves using complex mathematical formulas to predict demand and plan accordingly. The other is trial and error, which is much more informal and inexact. Without aggregate planning, things would be done in a careless manner.

Respond with 150 words – Operation Shilani

Aggregate planning involves developing, analyzing and maintaining the operational schedule of an organization. It organizes areas of business that include targeted sales forecasts, production levels, inventory levels and customer backlogs. When aggregate planning is carried out effectively, the effects of short-sighted, daily scheduling are minimized. Capacity and demand are balanced in a way that minimizes costs where aggregate resources may include the total number of workers, hours of equipment and machine time, or tons of raw materials. Since services do not involve stockpiles or inventory, service focused businesses do not have the luxury of building up their inventories during periods of low demand. In aggregate planning, services are considered perishable, where any capacity that is unused is considered to be wasted. For example, an empty hotel room or an empty flight seat cannot be held and sold at a later time. Services have variable processing requirements that make it hard to establish a good measure of capacity. Aggregate planning in manufacturing involves allocating the correct amount of resources for every manufacturing process so that the time and costs are minimized during idle mode. Aggregate planning in manufacturing works well because of the ability to produce, hold and sell inventory at any given time. Alternatively, aggregate planning in services differs substantially because services cannot be inventoried. The demand for services is much more difficult to predict and capacity is also difficult to measure. Service capacity must be provided at the right place and the right time, while labor is generally the most constraining service resource.

Florida Atlantic University S

Prompt: My uncle is quick to judge other people.   I can imagine him saying something like this as we sit around the Thanksgiving dinner table.    

“People are idiots!  Too many people don’t take care of their health.  They eat too much or they eat a lot of junk food or they smoke cigarettes or they drink too much alcohol or they don’t exercise.  So, they get sick from some chronic disease and die earlier than they should.   They don’t listen to their doctors and they won’t do what they should be doing to stay healthy.  Idiots!!

It’s true in general and it’s true in the case of COVID.  Look at what happened when COVID first hit.  Before the vaccines were available, it was clear that people who hadn’t taken care of their health were much more vulnerable to it.  Not the old folks, of course — they were just old.   But look at all of the younger ones who died:  most of them had some pre-existing problem, like being fat or having diabetes that came from being fat.    And now, look at all of the people who are still getting sick after the vaccines are available.    They must just be idiots if they haven’t already been vaccinated.    

The bottom line is that lots of people are idiots who make a lot of bad choices.   If they took care of themselves and listened to their doctors and other medical experts, they’d have a much better chance of having long and healthy lives.   Idiots!   They’re all idiots!”

Write a post in which respond to my uncle by using what you have learned in modules one, two and three.   Apply the sociological imagination to your response.  Help my uncle to understand why “they’re all idiots” is not a sociological explanation of rates of disease.   Explain how the sociology of medicine would explain rates of chronic illness and patterns of COVID death/illness without saying “people are idiots and make stupid choices”:   show him that using a sociological approach helps us to understand these rates/patterns better than being judgmental does.

Florida Atlantic University S

I’m working on a business question and need guidance to help me study.

Respond with 150 words – Rebecca

Twitter, Instagram and Facebook can represent a major opportunity or threat for a company. Regarding the opportunities, these social media can add new dimensions to the company’s omnichannel customer service. Many customers use them as the primary way of interacting with the brand since they receive prompt attention. The company has the opportunity of delivering omnichannel customer service through a tool like REVE Chat. With it, a company can streamline its clients’ chats across Twitter, Facebook and Instagram, in providing excellent customer service and increasing productivity (Bhattacharya, 2020). Social media also helps the company influence bigger audience, increase exposure for the business and create brand awareness. Through Twitter, Facebook and Instagram, the company collects first-hand information from the customers, thus getting to know their likes and dislikes, which allows it to improve its reputation, image and strengthen its relationship with customers.

However, social media can pose a significant threat to the company. A company can lose its IP and sensitive data in theft or leakage and risk of unsuitable release of information to the company. Social media also involves compliance violations (DeLoach, 2020). A company has the chances of communicating information and data that breaks applicable rules and guidelines, including data security issues, breaches of privacy rights, copyrights, infringement of trademarks and mishandling of electronic communications. Social media also can lead to a company’s reputation loss. Therefore, when consumers’ opinions spread quickly through Facebook, Twitter and Instagram, the company needs to give effective feedback in a crisis.

Respond with 150 words – Kelly

Technological forces have presented companies with many opportunities. Sites like Facebook, Twitter, and Instagram are platforms that have allowed companies to reach vast audiences of all different walks of life and with different characteristics. This has opened up opportunities to target customers with marketing campaigns, build brand awareness, interact more easily with customers, and even measure referrals from your social media activity to sales (“Social media best practice for business”, n.d.). When you know how social media ties into the amount of sales you are making and who those sales are coming from, you have more data to work with in knowing who you want to target and how you can target them.

On the other hand, if a customer has a bad experience with a company, they have a social media platform that they can take their complaint to which can quickly spread around to others being aware of the issue that occurred. This can create negative press and a bad reputation for that company, depending on how severe the problem was. Just in the same way that bad experiences can be shared, great experiences can also be shared and attract positive attention to companies and their initiatives. Our textbook highlights that it is important for companies to monitor the online reviews that they receive, despite it being a redundant task (David, David, 2020). Customers are especially opinionated and when given the opportunity on an online platform, will share their disdain or satisfaction with ease.

Florida Atlantic University S

Company name : Shake Shack

assignment is to write a 6-8 page (minimum) research paper analyzing the HRM concepts, policies, practices and procedures we learn in this class for an organization of your choice. 

This paper will focus on:? 

  • Chapter 11: Employee Benefits 
  • Chapter 12: Promoting Safety & Health 
  • Chapter 13: Employee Rights and Discipline 
  • Chapter 14: The Dynamics of Labor Relations 
  • Chapter 15: International Human Resources Management 

This paper should examine how your company of choice provides benefits and what benefits they offer. What benefits must be provided by the organization? How do these benefits differ between full and part time employees? Do employees like the benefits they are provided? How does the company try to manage benefit costs? 

The paper will also examine the role of health and safety within the organization. What role does HR play in providing health and safety policies to employees.  What consequences could result in poor health and safety practices? What are the employee responsibilities when it comes to safety?  How does OSHA or other governmental agencies provide oversight for health and safety to the organization? Can you find examples of safety accidents, workplace violence or other incidents of concern?  What impact did these incidents or violations have? 

The paper will also explore employee rights and how management makes disciplinary decisions. Can you find examples or violations that have resulted in these decisions? Have employees been wrongfully terminated or have other employee rights been violated? What outcome did this have on the employee and/or organization?  Is the company (or industry) unionized? How would a union relationship impact how the organization is managed? How has the organization tried to promote or avoid unionization? 

Finally discuss if the company operates internationally and how this process is different than in the US. If the company is not an international organization, what laws or differences should they consider if moving into a global market place?  

Conclude with your key takeaways or suggestions on improvement. 

Place this order or similar order and get an amazing discount. USE Discount code “GET20” for 20% discount